Written By Ron Parker
We may earn revenue from the products available on this site and participate in affiliate programs. Learn more
At Deer Hunting Guide, we obviously have a passion for bowhunting. At the same time, we love the sport of archery in general and know what a difference a good target shooting bow can make. Since it's our overall favorite bow for Olympic competition archery, we decided to put together this full Topoint Endeavor Takedown Recurve Bow review complete with pros, cons and side-by-side comparisons with other popular models.
What’s Included in the Package?
There's quite a bit included in the Topoint Endeavor Takedown Recurve Bow package. For starters, you get the bow itself, which includes the aluminum riser, wooden grip, two laminated limbs and a bowstring. The package also includes a lot of useful extras too, though, such as:
- Riser cover: This is basically a case for the riser that keeps it dry and safe from scratches that could damage the finish. It's not tough enough to protect it from impacts necessarily, but it still adds an extra barrier for storage and transportation, important for competition archery.
- Two limb covers: Like the riser cover, these keep the limbs safe and dry. These are even more useful in our opinion because the limbs can be a bit more fragile and subject to wear from the elements.
- Four brass nocks: We love that Topoint Endeavor includes so many nocking points. Using at least two, one above the arrow nock and one below helps keep the arrow straight through the shot cycle, ideal for Olympic target shooting. Four lets you add multiple nocking points for different distances or just keep some spares for whenever you need them.
- Bow stringer tool: A bowstringer tool is a cable that connects to either limb and lets you use your foot as leverage while you apply tension to the limbs and attach the bowstring. We consider this a necessary accessory to string your bow safely, so it's a good thing Topoint included it.
Additionally, the package includes Allen keys for installing the limbs as well as a manual with clear instructions for assembling the bow.
Assembling the Topoint Endeavor ILF Takedown Recurve Bow
Even though it's an aluminum Olympic bow, assembly of the Endeavor Takedown Recurve is basically the same as any other wooden takedown recurve model. The main step is attaching the limbs to the riser by inserting them into the limb pockets and securing them with the Allen screws.
Now that your bow is put together, you have to string it. Stringing a bow isn't complicated, but you do have to do it correctly to avoid hurting yourself or damaging the bow. You should make sure you've done your research ahead of time.
Features / Specifications
RELATED: How To Choose A Recurve Bow With Size Chart
Draw Weight
The Topoint Endeavor Takedown Recurve Bow comes in draw weights from 18 pounds up to 44 pounds in two-pound increments. An Olympic target shooting model, this is a lower range than you'll find on hunting models, which usually need at least a 40-pound draw to meet state regulations.
Since this is a takedown bow, though, you can change out the limbs to get the specific power you want. This way you can get a set of limbs with enough draw weight for hunting and only install them when needed.
AMO Length
Compared to hunting recurves, the Topoint Endeavor Takedown Recurve is long. There are three different AMO lengths to choose from: 66, 68 and 70 inches. These lengths translate to different draw lengths, the main reason to pay attention to them.
Draw Length
The Topoint Endeavor Takedown Recurve Bow has three available draw lengths. The 66-inch model has a draw length of 26.5 inches, the 68-inch model 29 inches, and the 70-inch model is for draw lengths over 29 inches.
Your exact draw length depends on a few factors, so you can get it precisely measured at your local archery shop. However, you can estimate it by dividing your wingspan—the length between the tips of your middle fingers when your arms are outstretched—by 2.5.
Since the average person's wingspan is similar to their height, you can get an even faster estimate by dividing your height by 2.5. This means that there's an Topoint Endeavor Takedown model for anyone between the heights of about 5'4" to 6'4", a great range.
Pros and Cons of the Topoint Endeavor ILF Takedown Recurve Bow
What We Like
Specific Draw Weights
The Topoint Endeavor Takedown Recurve Bow has a range of draw weights appropriate for Olympic-style athletic archery: 18-44 pounds. More importantly, you can get these in two-pound increments, which allows for precise calibration to your strength and skills.
Wide Range of Draw Lengths
The Topoint Endeavor Takedown Recurve is great for all shapes and sizes. On the one hand, you can get the 66-inch AMO length, which has a draw length of 26.5 inches. This is ideal for people around 5'6" and will probably work well all the way down to 5'4", good for youth and women.
On the other end of the spectrum, the 70-inch model is adequate for draw lengths over 29 inches. This makes it great for tall archers, even those over 6'3".
Wooden Grip
We like the wooden grip installed in the Topoint Endeavor recurve's otherwise aluminum riser. Not only does it provide a nice decorative touch to the bow, but it's comfortable and ergonomic, allowing for a more natural and accurate shot.
Lightweight Frame
Since it's made of aluminum, the Endeavor Recurve Bow is especially lightweight at just over two pounds. This is especially helpful for target shooting because you'll likely be holding the bow longer while aiming and taking numerous shots over long periods of time. A heavier bow means more fatigue for your shoulder muscles that will ultimately affect your accuracy.
Easy Limb Alignment
Takedown recurve bows have the big advantage that you can change out the limbs or take them off for storage and transportation. However, it can sometimes be difficult to install the limbs securely and consistently.
That's not the case on the Endeavor model, though, because the limb pockets are well-designed for limb alignment. This involves ILF limb pockets with easy-to-use mechanisms for limb installation.
What We Don’t Like
Lots of Vibration
We found that the Topoint EndeavorTakedown Recurve Bow vibrates quite a bit on the shot. This is less important on a target-shooting bow as opposed to a hunting bow since you aren't trying to avoid noise. Nevertheless, a lot of vibration can fatigue your shoulder muscles and make it harder to hold the bow with stability for an accurate shot.
RELATED: Bow String Silencers
Right-Handed Only
The Topoint Endeavor Takedown Recurve Bow is only available in a right-handed model where you hold the grip with your left hand and draw the bowstring with your right. If you're left-handed, it's not a good idea to use a right-handed bow because it can lead to painful wrist slap in addition to negatively affecting your accuracy.
RELATED: Do I Need A Right Or Left Handed Bow
The Topoint Endeavor ILF Takedown Recurve Bow Quality
Riser
The Topoint Endeavor Takedown Recurve's riser is made of a magnesium aluminum alloy. While arguably not as pretty as wood, this makes it tough and durable but lightweight at the same time. This is ideal for Olympic-style target archery.
RELATED: Best Arrow Rests
Limbs
The limbs on this Topoint bow are made of laminated fiberglass and hard maple wood. This also helps keep the weight low while providing consistent tension over time.
Overall, the quality of the lamination is great, though we did find that the fiberglass nicks easily. While this rarely affects performance, it can affect appearance.
Grip
We love the grip on the Topoint Endeavor Takedown Recurve Bow. Made of wood, it adds a sophisticated look and feel to the utilitarian design. More importantly, it's ergonomic and warm, so it's comfortable and intuitive to hold for long periods of time even if you're new to the sport.
String
The string on the Endeavor Takedown Recurve is decent and maintains its tension over lots of shots. Nevertheless, it will fray after enough time, so you may consider upgrading the bowstring.
Is the Topoint Endeavor Takedown Recurve Bow Good for Beginners?
The Topoint Endeavor Takedown Recurve Bow is an ideal bow for beginners looking to get started with archery. With draw weights available as low as 18 pounds, you can get manageable power in a lightweight frame that's easy to practice and learn on. Plus, you can slowly increase the power in two-pound increments thanks to the takedown design.
RELATED: Best Beginner Recurve Bow
Is the Topoint Endeavor Takedown Recurve Bow Good for Kids?
The Topoint Endeavor Takedown Recurve Bow is a good choice for youth archers because it's available in a 66-inch AMO length that works for shooters with draw lengths under 26.5 inches. This is good for archers as short as 5'4", which could mean women, teenagers and even taller kids.
RELATED: Best Youth Recurve Bow
Is the Topoint Endeavor Takedown Recurve Bow Good for Hunting?
The Topoint Endeavor Takedown Recurve Bow is designed for Olympic target archery, not bowhunting. It's long, which makes it hard to maneuver through the woods or in a tree stand, and it's louder than other wooden recurve bows. Nevertheless, it is available in draw weights over 40 pounds, so you could potentially use it effectively for hunting.
Related: Best Recurve Bow For Hunting
The Topoint Endeavor Takedown Recurve Bow vs the Samick Sage
The Samick Sage is arguably the most popular takedown recurve bow on the market and the standard people look to when judging the others. However, we'd still recommend the Topoint Endeavor ILF Takedown Recurve Bow if you're interested in Olympic archery competitions because it's long, lightweight and better for non-standard draw lengths.
The Topoint Endeavor Takedown Recurve Bow vs the Southwest Archery Spyder
The Spyder rivals the Topoint Endeavor Takedown Recurve when it comes to weight. Still, the Spyder, like the Sage, is more of a hunting bow while the HYF bow is better for target shooting. The Spyder has higher draw weights and a great takedown design for taking advantage of them while the HYF recurve is longer and more stable.
The Topoint Endeavor Takedown Recurve Bow vs the SAS Courage
A Samick Sage clone, the SAS Courage is definitely designed for hunting and in fact is our go-to hunting takedown recurve. If you're getting into Olympic archery, though, we suggest the Topoint Endeavor ILF Takedown Recurve Bow.
The Topoint Endeavor Takedown Recurve Bow vs the Bear Grizzly
The Bear Grizzly is a high-quality recurve bow with excellent craftsmanship. However, it's a single-piece bow, not a takedown model.
Additionally, while the Grizzly is a good choice for both bowhunting and target shooting, it's more geared towards hunting. The Topoint EndeavorTakedown Recurve Bow isa better choice if you want a dedicated target-shooting bow with takedown capabilities.
Wrapping Up The Review
The Topoint Endeavor ILF Takedown Recurve Bow is our recommendation for Olympic target archery. It's long and lightweight for consistent accuracy even when shooting for long periods of time. It also has a lot of draw weight and draw length options to fit a range of archers from youth to men and women.
RELATED:
